Denomination Code Setup
Adding a New Denomination Code
- From the main menu of DDI-Connect, double-click Name/Address
- Double-click Setup
- Double-click Codes Maintenance. You will see this screen:
Scroll down until you find the code set you are wanting to modify, and double-click that code set.
In this case, you are modifying code set # 0005 - Denomination codes. Double-click the code set. You will see this screen:
If you wish to add a new code, click the "New" button on the toolbar. You will see this screen:
You have the following fields available:
Field | Description |
---|---|
Code | Enter a 4 digit alphanumeric code that will be a unique identifier for this denomination |
Active | If this box is checked, the code will be active and available for selection |
Description | Enter a description for this code |
Security | This function utilizes the DDI-Connect Security codes. For a thorough understanding of how security works within DDI-Connect, we recommend you reference the Security document located here: Security Function Maintenance
To set security on a specific code, you would enter the requirements in this format: !NA/7 or #NA. These are just examples...you can use whatever security function you like in order to restrict access to a code. |
Default? | Example |
Numeric value 2 | this field is used in conjunction with third party external software, and should not be modified unless otherwise indicated by DDI staff |
Religion | If your organization wishes to do so, you can establish internal only codes that reference the particular religion that this denomination belongs to. For example, you may have a code for Protestant that is PROT, or BAP for Baptist |
Affiliation | Example |
When you have entered the information, click OK to add the new code to the list.